ExhibitionData
MCE 2026 Exhibitor List: 1,600+ HVAC+R, Water and Energy Companies from Milan

MCE 2026 Exhibitor List: 1,600+ HVAC+R, Water and Energy Companies from Milan

Event Date 24TH MAR - 27TH MAR 2026

Location

Fiera Milano, Rho (MI), Milan, Italy

MCE 2026 ran March 24–27 at Fiera Milano in Rho and closed with 1,600+ exhibitors and about 120,000 visitors. This page covers who exhibited, how to check the organizer's directory, and how our exhibitor list adds business contacts before MCE returns on March 7–10, 2028.

MCE 2026 Exhibitor List: 1,600+ HVAC+R, Water and Energy Companies from Milan

⬇

  • Verified & Validated Business Leads
  • Company Details & E-mail Addresses
  • Data Solutions for Privacy Compliance
  • Fair & transparent pricing
  • Data tailored to your needs

MCE 2026 at a Glance

MCE – Mostra Convegno Expocomfort is Milan’s biennial HVAC+R, renewable energy, energy efficiency and water show. The official MCE website describes it as a marketplace where companies meet the engineers, specifiers and installers who put efficient building systems into practice.

The 44th edition ran from March 24 to 27, 2026. The figures below come from RX Italy’s final press release, issued on the closing day.

Metric Figure Source and notes
Total Exhibitors 1,600+ Organizer’s closing figure, March 27, 2026. Companies from 49 countries.
Total Attendees Approximately 120,000 visitors Organizer’s closing figure. More than 35% came from abroad.
International visitors 38,000+ from 123 nations Organizer. Reported as a 6% rise on the previous edition.
Edition and cycle 44th edition, held every two years Organizer
Dates March 24–27, 2026 Organizer
Venue Fiera Milano, Rho (Milan), Italy Organizer
Organizer RX Italy Organizer
Next edition March 7–10, 2028 (45th) Organizer’s website and press release

The organizer rounds its numbers, so read “1,600+” and “approximately 120,000” as floors and estimates, not exact counts.

 


 

The Show Is Over, but the List Still Has a Job

MCE took place every two years, so there is no 2027 edition. The official site already lists March 7–10, 2028 as the next date, which leaves roughly 17 months in which the 2026 exhibitor roster is the most recent complete record of who invests in this show.

That is useful, but it has limits. A 2026 list is not a 2028 list: companies merge, change contacts and skip editions. The better way to use it is as a head start, then refresh it as the next edition approaches.

Window What is confirmed How a list helps (our suggestion)
Now through 2027 The 2026 edition is complete Open conversations with companies that exhibited, using their 2026 presence as the reason to get in touch
April 2027 RX Italy has announced the second edition of Heat Pump Technologies, a separate event Relevant if you sell into heat pumps; do not treat it as MCE
Late 2027 to early 2028 MCE’s next edition is announced Compare your list against the organizer’s directory as 2028 exhibitors appear
March 7–10, 2028 The 45th MCE at Fiera Milano, Rho Book meetings before the show rather than relying on walk-up traffic

 


 

Who Exhibited: The Four Sectors on the 2026 Floor

The organizer groups MCE into four areas. This is the clearest guide to the kinds of companies on the exhibitor list.

Sector Products and technologies the organizer lists
Indoor Climate Heating, air conditioning, heat pumps, ventilation, refrigeration, solar heating, geothermal, cogeneration
Plant Technologies HVAC components, equipment and tools, insulation, project services
Water Solutions Plumbing technology, water treatment, taps, bathroom accessories, wellness
That’s Smart Photovoltaics, storage, e-mobility, smart home and building

Two companies have publicly confirmed their 2026 presence. Samsung reported eight MCE Excellence Awards, as covered by Refindustry, and FläktGroup said it showed products in a dedicated space within Samsung’s stand. For the full roster, the organizer’s Exhibitors Directory is the place to check.

 


 

Beyond the Booths: Programs, Awards and the Japan Partnership

Exhibitor lists are more useful when you know what each company was doing at the show. These are the 2026 programs the organizer and trade press reported.

Program What was reported
Japan as Country Partner An initiative to connect exhibiting companies with decision-makers from Japan, with pre-fair meetings supported by Italian and Japanese institutions (official site)
MCE Excellence Awards 2026 18 selected products shown in a dedicated area in Hall 18 (trade press citing MCE)
Conference programme Sessions on incentives such as Conto Termico 3.0, the implementation of the EPBD IV directive, heat pump outlook and HVAC digitalization (RX Italy)
Focus topics Industry, Digitalization and Water (official site)
International presence Companies from 49 countries; visitors from 123 nations; strong participation from the Middle East (organizer)

If you sell to HVAC+R manufacturers, an award winner, a Japan-market exporter or a water-technology company each calls for a different opening line. A segmented list lets you write it.

 


 

What the ExhibitionData MCE 2026 Exhibitor List Adds

The organizer’s catalogue is a free way to check which companies exhibited. Our exhibitor list is built for outreach, so it adds the people and the contact details.

Data point What it is for
Company name and profile Confirming who exhibited and what they make
Decision-maker name and job title Reaching the buyer, engineer or director rather than a generic inbox
Business email address Direct outreach and account-based campaigns
Phone number Calls and follow-up
Website and company details Qualifying fit before you write
Country and location Splitting Italy from export markets
Sector segment (for example Water Solutions only) Custom cuts on request
Booth number Ask at quote stage

Attendee data is a separate service. See our attendee data page and ask about MCE when you request a quote.

 


 

Who Gets the Most from This List

If you are a… You would use the list to… Best sector
Component or OEM supplier Reach HVAC+R manufacturers that source valves, controls, motors or fittings Plant Technologies
Distributor or wholesaler Find brands looking for new routes to market Indoor Climate, Water Solutions
Smart-building or controls software vendor Approach companies building connected systems That’s Smart
Logistics, installation or export service firm Offer freight, install or customs support to exhibitors All sectors
Water-treatment or plumbing specialist Map competitors and partners Water Solutions
Analyst or investor Map the heat pump, storage and water supply base Indoor Climate, That’s Smart

 


 

Checks Before You Buy Any MCE Exhibitor List

Pages selling MCE data disagree with each other and with the organizer. Use this table to test any list, including ours.

Check What a correct list shows
Edition The 44th edition, 2026
Dates March 24–27, 2026
Tense Past tense. A page that says MCE “will be held” is out of date
Exhibitor scale Organizer’s figure is 1,600+. Pages claiming anything from about 1,200 to 2,300+ should explain the gap (a list may cover fewer companies than exhibited, but should say so)
Visitor scale Approximately 120,000, not a figure well above it
Next edition March 7–10, 2028
Sample A sample you can check against the organizer’s directory

 


 

Request the MCE 2026 Exhibitor List

Tell us which sectors and countries you want and we will send a quote. You can also read who we are, browse other events, or contact the team.

Get a Quote

 


 

Frequently Asked Questions

MCE is an international trade fair in Milan for HVAC+R, renewable energy, energy efficiency and water technologies. It is organized by RX Italy and held every two years at Fiera Milano in Rho.

The 44th edition ran from March 24 to 27, 2026, at Fiera Milano in Rho, near Milan, Italy.

The organizer reported more than 1,600 exhibitors, with companies from 49 countries taking part. It rounds the figure, so treat it as a minimum rather than an exact count.

The organizer reported approximately 120,000 visitors, more than 35% of them from abroad. That includes over 38,000 visitors from 123 nations, a 6% increase on the previous edition.

The 45th edition is scheduled for March 7–10, 2028, at Fiera Milano in Rho. MCE runs every two years. RX Italy has also announced the second edition of a separate event, Heat Pump Technologies, for April 2027.

The show is organized into four areas: Indoor Climate (heating, air conditioning, heat pumps, ventilation, refrigeration), Plant Technologies, Water Solutions (plumbing, water treatment, taps, bathroom accessories) and That's Smart (photovoltaics, storage, e-mobility, smart home and building).

Yes, with a caveat. The list shows which companies invested in the 2026 edition, which makes it a strong starting point for outreach before 2028. Companies change, so it should be refreshed against the organizer's new directory as the next edition approaches.

It covers company details, business email addresses, phone numbers and decision-maker names and titles. The exact fields available for each company are confirmed at quote stage.

Attendee data is a separate service from the exhibitor list. Availability for MCE can be confirmed through a quote request.

What Our Customers Say

Finding the right channel partners at automotive trade shows used to depend on who we happened to run into on the floor. Attendee data filtered by title let us set up meetings before the event even started.

Sofia Alvarez

Channel Partnerships Manager — Redline Automotive Technologies

We run outreach for a handful of B2B clients at once, and event-based lists consistently convert better than cold lists. Filtering exhibitor data by industry let us build lists for two clients in the same session.

Marcus Whitfield

Account Director — Harborview Marketing Partners

Part of our deal-sourcing process is tracking which companies are showing up at industry events — it's an early signal on who's scaling. This data made that tracking systematic instead of ad hoc.

Claire Doyle

Investment Research Associate — Fenwick Capital Partners

For a client competitive-landscape report, we needed to know who exhibited at a specific trade show two years running. Having that historical exhibitor data made the analysis possible without contacting the show organizer directly.

Daniel Osei

Senior Market Research Analyst - Bellweather Consulting Group

We sell industrial components and needed to know which distributors were showing up at three European trade shows this year. The exhibitor breakdown by country saved our sales team weeks of research.

Laura Kimura

VP of Sales — Ashcroft Industrial Supply

Sponsorship prospecting used to mean scrolling exhibitor directories by hand. Having attendee data filtered by job title meant we went straight to the people who actually sign off on sponsorship budgets.

Tom Bracken

Sponsorship & Partnerships Director — Meridian Trade Media

We had three days to build a target list before a manufacturing expo we couldn't attend in person. The exhibitor list let us pull every relevant company by industry and country in an afternoon instead of a week of manual digging.

Priya Raman

Head of Demand Generation - Northlane Software

MCE 2026 Exhibitor List: 1,600+ HVAC+R, Water and Energy Companies from Milan

MCE 2026 ran March 24–27 at Fiera Milano in Rho and closed with 1,600+ exhibitors and about 120,000 visitors. This page covers who exhibited, how to check the organizer's directory, and how our exhibitor list adds business contacts before MCE returns on March 7–10, 2028.
Ready to Find the Right Business Contacts?

Ready to Find the Right Business Contacts?

Whether you need exhibitor data, attendee data, or a custom event list, our team is here to help you find the right prospects for your next outreach campaign.